OVNM 5.3 - Operations Agent for NonStop Object Reference Guide

Threshold Policies 18
2-2 BASE24
BASE24 is a major ATM application available from ACI. This software is used by most of the world’s major
banking institutions for their credit card transactions. The counters/modifiers defined under this subsystem help
monitor and manage various objects like LINE, LINK, PROCESS, STATION and SYSTEM. The strength of OVNM
with BASE24 is that it provides full auto recovery of the objects via the proven PNA 24 management module. The
PNA24 module is used for discovery and recovery of the BASE24 objects and is included in the base product.
This greatly increases the ‘Out-Of-Box’ capabilities of OVNM, especially regarding a major application such as
BASE24.
NOTE:
The BASE24 subsystem will only be available if you have installed the BASE24 plug-in.
2-2-1 OBJECT CLASS: LINE
Policy
Description
Operators Allowed
IO STATUS – CLOSED This threshold type allows the user to check if the
current I/O activity on the line is CLOSED.
•
EQUAL TO
• NOT EQUAL TO
IO STATUS – IDLE
This threshold type allows the user to check if the
current I/O activity on the line is IDLE.
• EQUAL TO
• NOT EQUAL TO
LOGICAL STATE – STARTED This threshold type allows the user to check if the
last operator action on the line has STARTED.
•
EQUAL TO
• NOT EQUAL TO
LOGICAL STATE – STOPPED
This threshold type allows the user to check if the
last operator action on the line has STOPPED.
• EQUAL TO
• NOT EQUAL TO
QUE COUNT This threshold type allows the user to check the
number of messages queued for all stations
associated with the line.
•
Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less
than <value2>
• Less than <value1> or greater than
<value2>
STATE – ABNORMAL
This threshold type allows the user to check if the
line is in ABNORMAL state.
• EQUAL TO
• NOT EQUAL TO
STATE – STARTED This threshold type allows the user to check if the
line is in STARTED state.
•
EQUAL TO
• NOT EQUAL TO
STATE – STOPPED
This threshold type allows the user to check if the
line is in STOPPED state.
• EQUAL TO
• NOT EQUAL TO
STATE – STOPPING This threshold type allows the user to check if the
line is in STOPPING state.
•
EQUAL TO
• NOT EQUAL TO
STATIONS STARTED
This threshold type allows the user to check the
number of stations associated with the line in the
STARTED state.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less
than <value2>
• Less than <value1> or greater than
<value2>