Manualshelf

OVNM 5.3 - Operations Agent for NonStop Object Reference Guide

ManualsBrandsHP ManualsServerHP NonStop G-Series
231232233234235236237238239240
Recovery Methods 231
Object Class
Recovery Method
Description
TCP Restart TCP This recovery will restart a monitored Pathway TCP
process.
This recovery method is only available for the TCP
STOPPED threshold.
TERM
Restart TERM
This recovery method will restart a monitored Pathway
Term.
This is available only for the following thresholds:
• TERM ABORTED
• TERM STOPPED
Resume TERM This recovery method will resume a monitored Pathway
Term.
This is available only for the TERM SUSPENDED
threshold.
3-7 PROCESS
Object Class
Recovery Method
Description
DYNAMIC/OBJEC
T/TERM/USER
Reset Priority This recovery method will reset the priority of the monitored
process to the value set in the monitoring threshold.
This method is available only for the PRIORITY OF PROCESS
threshold.
Set Priority to <value1>
This recovery method will change the priority of a monitored
process to the specified value set in the Value 1 field.
This method is available only for the PRIORITY OF PROCESS
threshold.
OBJECT/PROCESS
/TERM/USER
Restart Process Using <Command> This recovery method will restart the monitoring process using
a TACL command no longer than 128 bytes or using an
OBEY.
This recovery method is only available for the PROCESS IS
DOWN threshold.
OBJECT/PROCESS
/TERM/USER
Stop PROCESS
This recovery method will stop the monitored process. Be sure
that user ID can stop the desired process.
This recovery method is available for the following thresholds:
• PROCESS IS LOOPING
• PROCESS IS UP
OBJECT/PROCESS
/TERM/USER
Suspend PROCESS This recovery method will suspend the monitored process. Be
sure that user ID can stop the desired process.
This recovery method is available for the following thresholds:
• PROCESS IS LOOPING
• PROCESS IS UP
3-8 SNAX-XF
Object Class
Recovery Method
Description
LINE Restart LINE This recovery method will restart the monitored SNAX-XF line.
This recovery method is only available for the LINE NOT
STARTED threshold.
LU
Start LU
This recovery method will restart (Abort/Start) a SNAX LU
irrespective of the initial cause of the error.
PU
Start PU This recovery method will restart (Abort/Start) a SNAX PU
irrespective of the initial cause of the error.
Recovery Methods