OVNM 5.3 - Operations Agent for NonStop Object Reference Guide

Recovery Methods 233
3-9 SPOOLER/SPOOLERP
Object Class
Recovery Method
Description
COLLECTOR Delete Jobs Older then <Value 1> Days
Progressively Until <Value 2>
This will delete Spooler jobs older then Value 1 days until
the date of the job = Value 2 or collector less than 10%
threshold.
This recovery method is available only for the
COLLECTOR FILE PERCENT_FULL threshold.
DEVICE
Start DEVICE This recovery method will start a monitored Spooler
Device.
This threshold method is available for the following
thresholds:
• DEVICE ERROR
• DEVICE OFFLINE
Start print process This recovery method will start the print process.
This threshold method is available for the DEVICE PRINT
PROCESS ERROR threshold.
PRINTPROC
Restart print process This recovery method will restart a print process.
This threshold method is available for the PRINT
PROCESS ERROR threshold.
3-10 TAPE
Object Class
Recovery Method
Description
TAPE Accept MOUNT This recovery method will accept a mount request from
the Tape subsystem.
3-11 TCPIP
Object Class
Recovery Method
Description
PROCESS
Reset priority
This recovery method will reset the priority of the
monitored process to the value set in the monitoring
threshold.
This recovery method is available for the PRIORITY OF
PROCESS threshold.
Set Priority to <Value 1>
This recovery method will change the priority of a
monitored process to the specified value set in the Value
1 field.
This recovery method is available for the PRIORITY OF
PROCESS threshold.
Restart Process Using <Command>
This recovery process will restart the monitored process
using a TACL command not longer than 128 bytes or
using an OBEY.
This recovery method is available for the PROCESS IS
DOWN threshold.
Stop Process
This recovery method will stop the monitored process. Be
sure the AO user ID can stop the desired process.
This rec
overy method is available for the PROCESS IS UP
threshold.