OVNM 5.3 - Operations Agent for NonStop Object Reference Guide

Threshold Policies 27
Policy
Description
Operators Allowed
NORMAL LOG EVNT Q STATE
– NOM
This threshold type allows the user to check the
queuing state of the expedited log event queue.
The object will be in violation if the queue count is
greater than the queue limit for network overload
management.
• EQUAL TO
• NOT EQUAL TO
NORMAL LOG EVNT Q STATE
– NORMAL
This threshold type allows the user to check if the
queuing state of the expedited log event queue is
NORMAL.
•
EQUAL TO
• NOT EQUAL TO
NORMAL LOG EVNT Q STATE
– QAT
This threshold type allows the user to check the
queuing state of the expedited log event queue.
The object will be in violation if the queue count is
greater than the queue alert threshold but less than
the queue limit for network overload management.
• EQUAL TO
• NOT EQUAL TO
PERCENT MEM USED This threshold allows the user to check the
percentage of memory in use.
•
Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less
than <value2>
• Less than <value1> or greater than
<value2>
PRIM LOG STATUS – DOWN
This threshold type allows the user to check if the
status of the primary collector to which log
messages from the XPNET process are directed is
DOWN.
• EQUAL TO
• NOT EQUAL TO
PRIM LOG STATUS - HARD
ERROR
This threshold type allows the user to check if the
status of the primary collector to which log
messages from the XPNET process are directed is
HARD ERROR.
•
EQUAL TO
• NOT EQUAL TO
PRIM LOG STATUS - PATH
ERROR
This threshold type allows the user to check if the
status of the primary collector to which log
messages from the XPNET process are directed is
PATH ERROR.
• EQUAL TO
• NOT EQUAL TO
PRIM LOG STATUS -
SWITCHED
This threshold type allows the user to check if the
status of the primary collector to which log
messages from the XPNET process are directed is
SWITCHED.
•
EQUAL TO
• NOT EQUAL TO
PRIM LOG STATUS – TRANS
ERROR
This threshold type allows the user to check if the
status of the primary collector to which log
messages from the XPNET process are directed is
TRANSIENT ERROR.
• EQUAL TO
• NOT EQUAL TO
PRIM LOG STATUS – UP This threshold type allows the user to check if the
status of the primary collector to which log
messages from the XPNET process are directed is
UP.
•
EQUAL TO
• NOT EQUAL TO
STATE - AUTO-COMPL
This threshold type allows the user to check if the
current state of the node is AUTO-COMPL.
• EQUAL TO
• NOT EQUAL TO
STATE - AUTO-QUIESCE
This threshold type allows the user to check if the
current state of the node is AUTO-QUIESCE.
• EQUAL TO
• NOT EQUAL TO
STATE - AUTO-STRT
This threshold type allows the user to check if the
current state of the node is AUTO-STRT.
• EQUAL TO
• NOT EQUAL TO
STATE - INI This threshold type allows the user to check if the
current state of the node is INI.
•
EQUAL TO
• NOT EQUAL TO