OVNM 5.3 - Operations Agent for NonStop Object Reference Guide

Threshold Policies 30
2-3 CP6100
The CP6100 subsystem consists of the CP6100 input-output process (IOP) and a protocol module. The CP6100
IOP, also known as the CP6100 Communications Access Process (CAP), is a NonStop™ Himalaya process pair
running in a NonStop™ Himalaya host. The process acts as a file-transfer mechanism to move data between an
application and a protocol module that resides and runs in the Communications Line Interface Process (CLIP) as a
task. The protocol module is a microcode file or down load module (DLM) that contains OSI Layer-1 and Layer-2
processing tasks. The CP6100 CAP thus provides the application with a data-link level interface to asynchronous,
byte-synchronous, or bit-synchronous protocol modules in a 6100 Communications Subsystem (CSS), which uses
the ServerNet Wide Area Network (SWAN) concentrator. Application data is passed to one of several protocol
modules by CP6100. The protocol module gives the application extensive control over the line, and each
protocol module can control either a single line or multiple lines.
2-3-1 OBJECT CLASS: LINE
Policy
Description
Operators Allowed
DIAGNOSING
This threshold type allows the user to check line
diagnosing. The line name must be unique. The *
can be used but partial wildcards are not allowed.
No operator.
NOT STARTED This threshold type allows the user to check if the
status of the line is NOT STARTED. The line name
must be unique. The * can be used but partial
wildcards are not allowed.
No operator.
NOT STOPPED
This threshold type allows the user to check if the
status of the line is NOT STOPPED. The line name
must be unique. The * can be used but partial
wildcards are not allowed.
No operator.
STARTED This threshold type allows the user to check if the
status of the line is STARTED. The line name must
be unique. The * can be used but partial wildcards
are not allowed.
No operator.
STOPPED
This threshold type allows the user to check if the
status of the line is STOPPED. The line name must
be unique. The * can be used but partial wildcards
are not allowed.
No operator.
SUSPENDED This threshold type allows the user to check if the
status of the line is SUSPENDED. The line name
must be unique. The * can be used but partial
wildcards are not allowed.
No operator.
Threshold Policies