OVNM 5.3 - Operations Agent for NonStop Object Reference Guide

Threshold Policies 46
Policy
Description
Operators Allowed
NUM READS POSTED
This threshold monitors the current number of
concurrent reads the ICE process has issued against
the Tandem I/O process.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less
than <value2>
• Less than <value1> or greater than
<value2>
PERCENT MAX READS
ALLOWED
This threshold monitors the current percentage of
maximum reads allowed to be posted against the
Tandem I/O process.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less
than <value2>
• Less than <value1> or greater than
<value2>
PROTOCOL AHHC
This threshold tells when the MPC/Dataswitch
device protocol is in use on Data Link Control layer.
• EQUAL TO
• NOT EQUAL TO
PROTOCOL ETHERNET This threshold tells when the TLAM/Ethernet
controller protocol is in use on Data Link Control
layer.
•
EQUAL TO
• NOT EQUAL TO
PROTOCOL FDDI
This threshold tells when the TCP/X/Potomac
Scheduling FDDI communications device protocol is
in use on Data Link Control layer.
• EQUAL TO
• NOT EQUAL TO
PROTOCOL IPC
This threshold tells when InterProcess
Communication/Guardian File System protocol is in
use on Data Link Control layer.
• EQUAL TO
• NOT EQUAL TO
PROTOCOL LOOPBACK
This threshold tells when an internal protocol for
sessions between two local Logical Units within a
single ICE process is in use on Data Link Control
layer.
• EQUAL TO
• NOT EQUAL TO
PROTOCOL QLLC This threshold tells when the X25AM/X.25 protocol
is in use on Data Link Control layer.
•
EQUAL TO
• NOT EQUAL TO
PROTOCOL SDLC
This threshold tells when the ENVOY ACP/XF
protocol is in use on Data Link Control layer.
• EQUAL TO
• NOT EQUAL TO
PROTOCOL TOKENRING
This threshold tells when the TLAM/Token Ring
controller protocol is in use on Data Link Control
layer.
• EQUAL TO
• NOT EQUAL TO
STATE STARTED
This threshold monitors whether the line is in the
STARTED state.
• EQUAL TO
• NOT EQUAL TO
STATE STARTING
This threshold monitors whether the line is in the
STARTING state.
• EQUAL TO
• NOT EQUAL TO
STATE STOPPED
This threshold monitors whether the line is in the
STOPPED state.
• EQUAL TO
• NOT EQUAL TO
STATE STOPPING
This threshold monitors whether the line is in the
STOPPING state.
• EQUAL TO
• NOT EQUAL TO
STATE SUSPENDED
This threshold monitors whether the line is in the
SUSPENDED state.
• EQUAL TO
• NOT EQUAL TO