OVNM 5.3 - Operations Agent for NonStop Object Reference Guide

Threshold Policies 58
Policy
Description
Operators Allowed
MAX BTU LEN
This threshold type allows the user to check the
maximum number of bytes which can be sent or
received in a Basic Transmission Unit.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less
than <value2>
• Less than <value1> or greater than
<value2>
MAX BTU SEND Q LEN
This threshold type allows the user to check the
greatest number of BTUs concurrently waiting for
transmission since the PU was started.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less
than <value2>
• Less than <value1> or greater than
<value2>
NBR DYNAMIC PUS
STARTING
This threshold monitors the number of dynamic PUs
that are in the STARTING state.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less
than <value2>
• Less than <value1> or greater than
<value2>
PERCENT MAX BTU SENDQ
LEN
This threshold monitors the current percentage of
maximum ever BTU send queue length.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less
than <value2>
• Less than <value1> or greater than
<value2>
PLU SESSIONS
This threshold type allows the user to check the
number of sessions on this PU for which ICE is the
primary LU.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less
than <value2>
• Less than <value1> or greater than
<value2>
REJ FRAMES RCVD
This threshold type allows the user to check the
number of REJECT frames received.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less
than <value2>
• Less than <value1> or greater than
<value2>