OVNM 5.3 - Operations Agent for NonStop Object Reference Guide

Threshold Policies 65
Policy
Description
Operators Allowed
CIRCUIT RECEIVE PW
This threshold monitors the circuits that receive PW,
that is, an integer from 1 to 2000 inclusive. Current
PACING Window.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less
than <value2>
• Less than <value1> or greater than
<value2>
CIRCUIT RESOLVE PENDING
This threshold monitors whether the circuit is in the
resolve pending state, that is, the target DLSW is
awaiting the DLC_DL_STARTED indication following
the DLC_START_DL request. (DLC is waiting for a
Test response as a result of sending a Test
command).
• EQUAL TO
• NOT EQUAL TO
CIRCUIT RESTART
This threshold monitors whether the circuit is in the
circuit restart state, that is, the DLSW that originated
the reset is awaiting the restart of the data link and
the DL_RESTARTED response to a RESTART_DL
message.
• EQUAL TO
• NOT EQUAL TO
CIRCUIT RESTART PENDING
This threshold monitors whether the circuit is in the
circuit restart pending state. If the remote DLSW is
awaiting the DLC_DL_HALTED indication following
the DLC_HALT_DL request and the restart of the
data link.
• EQUAL TO
• NOT EQUAL TO
CIRCUIT SEND GRANTED
UNITS
This threshold monitors the circuit’s send granted
units, that is, an integer from 1 to 2000 inclusive.
Current PACING Window.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less
than <value2>
• Less than <value1> or greater than
<value2>
CIRCUIT SEND PW This threshold monitors the circuit’s send PW, that
is, an integer from 1 to 2000 inclusive. Current
PACING Window.
•
Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less
than <value2>
• Less than <value1> or greater than
<value2>
CIRCUIT SSAP ADDRESS
This threshold monitors the circuit’s SSAP address,
that is, a sequence of hexadecimal digits (0-9, A-F)
from %h4 to %hEC incl
usive. It is the Service Access
Point (SAP) address.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less
than <value2>
• Less than <value1> or greater than
<value2>
Threshold Policies