OVNM 5.3 - Operations Agent for NonStop Object Reference Guide

Threshold Policies 67
2-10-2 OBJECT CLASS: CIRCUIT-DMAC-DYNAMIC
Policy
Description
Operators Allowed
CIRCUIT CONNECTED This threshold monitors whether the circuit is in the
circuit connected state, that is, the end-to-end
connection has been established thereby allowing
LLC Type 2 services from end-to-end in addition to
LLC Type 1 services.
•
EQUAL TO
• NOT EQUAL TO
CIRCUIT DISCONNECT
PENDING
This threshold monitors whether the circuit is in the
circuit disconnect pending state, that is, the DLSW
that originated the disconnect is awaiting the
DL_HALTED response to a HALT_DL message.
• EQUAL TO
• NOT EQUAL TO
CIRCUIT DISCONNECTED This threshold monitors whether the circuit is in the
disconnected state, that is, the initial state with no
circuit or connection established, ICE DLSW is
awaiting either a CANUREACH_CS, or an
ICANREACH_CS.
•
EQUAL TO
• NOT EQUAL TO
CIRCUIT DSAP ADDRESS
This threshold monitors the circuit’s DSAP address,
that is, a sequence of hexadecimal digits (0-9, A-F)
from %h4 to %hEC inclusive. It is the Service Access
Point (SAP) address.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less
than <value2>
• Less than <value1> or greater than
<value2>
CIRCUIT ESTABLISHED This threshold monitors whether the circuit is in the
circuit established state, that is, the end-to-end
circuit has been established. At this time LLC Type 1
services are available from end-to-end.
•
EQUAL TO
• NOT EQUAL TO
CIRCUIT HALT PENDING
ACK
This threshold monitors whether the circuit is in the
circuit halt pending state, that is, the remote DLSW
is awaiting the DLC_DL_HALTED indication
following the DLC_HALT_DL request due to
receiving a HALT_DL message.
• EQUAL TO
• NOT EQUAL TO
CIRCUIT HALT PENDING NO
ACK
This threshold monitors whether the circuit is in the
circuit halt pending no ack state, that is, the remote
DLSW is awaiting the DLC_DL_HALTED indication
following the DLC_HALT_DL request due to
receiving a HALT_DL_NOACK message.
•
EQUAL TO
• NOT EQUAL TO
CIRCUIT PENDING
This threshold monitors whether the circuit is in the
circuit pending state, that is, the target DLSW is
awaiting a REACH_ACK response to an
ICANREACH_Cs message
• EQUAL TO
• NOT EQUAL TO
CIRCUIT RECEIVE GRANTED
UNITS
This threshold monitors the circuits receive granted
units, that is, an integer from 1 to 2000 inclusive.
Current PACING Window.
•
Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less
than <value2>
• Less than <value1> or greater than
<value2>
Threshold Policies