OVNM 5.3 - Operations Agent for NonStop Object Reference Guide

Threshold Policies 68
Policy
Description
Operators Allowed
CIRCUIT RECEIVE PW
This threshold monitors the circuits receive PW that
is, an integer from 1 to 2000 inclusive. Current
PACING Window.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less
than <value2>
• Less than <value1> or greater than
<value2>
CIRCUIT RESOLVE PENDING
This threshold monitors whether the circuit is in the
resolve pending state (the target DLSW is awaiting
the DLC_DL_STARTED indication following the
DLC_START_DL request.
• EQUAL TO
• NOT EQUAL TO
CIRCUIT RESTART
This threshold monitors whether the circuit is in the
circuit restart state, that is, the DLSW that originated
the reset is awaiting the restart of the data link and
the DL_RESTARTED response to a RESTART_DL
message.
• EQUAL TO
• NOT EQUAL TO
CIRCUIT RESTART PENDING This threshold monitors whether the circuit is in the
circuit restart pending state, that is, the remote
DLSW is awaiting the DLC_DL_HALTED indication
following the DLC_HALT_DL request and the restart
of the data link.
•
EQUAL TO
• NOT EQUAL TO
CIRCUIT SEND GRANTED
UNITS
This threshold monitors the circuit’s send granted
units, that is, an integer from 1 to 2000 inclusive.
Current PACING Window.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less
than <value2>
• Less than <value1> or greater than
<value2>
CIRCUIT SEND PW
This threshold monitors the circuit’s send PW, that
is, an integer from 1 to 2000 inclusive. Current
PACING Window.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less
than <value2>
• Less than <value1> or greater than
<value2>
CIRCUIT SSAP ADDRESS
This threshold monitors the circuit’s SSAP address,
that is, a sequence of hexadecimal digits (0-9, A-F)
from %h4 to %hEC inclusive. It is the Service Access
Point (SAP) address.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less
than <value2>
• Less than <value1> or greater than
<value2>