OVNM 5.3 - Operations Agent for NonStop Object Reference Guide

Threshold Policies 69
Policy
Description
Operators Allowed
CIRCUIT SSP VERSION
This threshold monitors the circuit’s SSP version, that
is, an integer from 1 to 16 inclusive. This is the
DLSW version being used on this CIRCUIT.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less
than <value2>
• Less than <value1> or greater than
<value2>
CIRCUIT START
This threshold monitors whether the circuit is in the
circuit start state, that is, the origin DLSW is
awaiting an ICANREACH_CS in response to a
CANUREACH_CS message.
• EQUAL TO
• NOT EQUAL TO
CONNECT PENDING
This threshold monitors whether the circuit is in the
connect pending state, that is, the origin DLSW is
awaiting the CONTACTED response to a
CONTACT message.
• EQUAL TO
• NOT EQUAL TO
CONTACT PENDING
This threshold monitors whether the circuit is in the
contact pending state, that is, the target DLSW is
awaiting the DLC_CONTACTED confirmation to a
DLC_CONTACT signal (i.e., DLC is waiting for a
UA response to a SABME command).
• EQUAL TO
• NOT EQUAL TO
NBR CIRCUITS CONNECTED
This threshold monitors the number of circuits that
are in the CONNECTED state.
• Equal to <value1>
• Not equal to <value1>
• Less than <value1>
• Less than or equal to <value1>
• Greater than <value1>
• Greater than or equal to <value1>
• Greater than <value1> and less
than <value2>
• Less than <value1> or greater than
<value2>
Threshold Policies