OVNM 5.3 - Operations Agent for NonStop SNMP Adapter Guide

Displaying Events on NNM 22
Step D: Starting Adapter Services
After uploading all the files, start the SNMP Adapter services using the following command from the
directory where SNMP Adapter was installed.
./Start.sh
This will start all the SNMP Adapter services and the events will be displayed on the NNM window.
Figure 3-6 NNM NonStop Alarms Browser with HP NonStop Events
Verifying Startup on the Workstation
Execute the following script from the directory where SNMP-Adapter has been installed.
./Status.sh
Stopping SNMP-Adapter
Execute the following command to stop all the SNMP-Adapter components.
./Stop.sh
3-3 Displaying Events on Windows NNMi 9.x
The following files are required for displaying the Events on Windows NNMi 9.x
1. NonStopTraps.tag
2. OVNMEvents_SNMP.mib
Step A: Copy Files
Once the SNMP Adapter is installed, the required files are copied at C:\ProgramFiles\OVNM\SNMP
Adapter\bin location by default.
Copy the files to the location where NNMi ( <NNMiDir>/NNMiInstall/bin/ ) is installed.
Displaying Events on NNM