OVNM 5.3 - Operations Agent for NonStop Troubleshooting Guide

Host Installation Client: Errors & Warnings 26
2-2-1-4 Adding EMS Distributors Configuration
The Distributor tab page of the New OVNM Configuration dialog box allows you to configure the HP NonStop
distributors and the collectors and filters associated with them.
Figure 2-5 New OVNM Configuration Dialog Box Distributor Tab Page
The different error messages and warnings displayed when adding a new OVNM Configuration related to the
Distributor tab page, their causes and the action to be taken are described in the following table.
Table 2-4 Adding EMS Distributors Configuration
Sr.No. Error Message and Warning
1.
Possible Cause: This message box is displayed when the Name field in the Distributor tab page has an invalid
value.
Action to be taken: Enter the name of the distributor in the Name field in the Distributor tab page.
2.
Possible Causes: This message box is displayed when the Process Name Suffix field in the Distributor tab page is
left blank or has an invalid value.
Action to be taken: Enter the last three characters of the process name of the distributor in the Process Name Suffix
field. The validations for the Process Name Suffix field are:
1 The length of this field can be 3 characters.
2 It should begin with a character. It can be followed by another character or a positive integer from 0-9.