OVNM 5.3 - Operations Agent for NonStop Troubleshooting Guide

OCC: Errors and Warnings 69
NonStop Nodes appear but Not All are Connected (Red Indicator)
Figure 4-3 OCC Connectivity Problems with the NonStop Servers
OCC
Elink
Service
elink.log
Elink
OV MN
Agent
Elink
OV MN
Agent
\DEV1
Elink
OV MN
Agent
Elink
OV MN
Agent
\DOTCOM
Windows Management
Wo r k s t a t i o n
Port
5020
5020
5020
NonStop Servers
OCC
Elink
Service
elink.log
Elink
OV MN
Agent
Elink
OV MN
Agent
\DEV1
Elink
OV MN
Agent
Elink
OV MN
Agent
\DOTCOM
Windows Management
Wo r k s t a t i o n
Port
5020
5020
5020
NonStop Servers
OVNM NonStop Server components must be up in order to manage and configure Object Thresholds using
Object Configuration Client (OCC).
Action: Verify that the OVNM NonStop Server components are up and running by obtaining status of OVNM
components on the NonStop Server.
This can be accomplished by using the Status button in the OVNM Host Management Client.
Figure 4-4 Host Management Client Option
The OVNM Host Response for Status of Agent dialog box is displayed giving the status of all the NonStop Server
components.
Figure 4-5 OVNM Host Response for Status of Agent Dialog Box
Review the status output for errors. If an error has occurred and more information is needed, refer to the NonStop
Server EMS event log for additional messages. HP OVNM EMS errors events are generated with
“TANDEM.OVNM” SYSID.
If you need to restart the NonStop Server components, use the Stop Agents/Start Agent button in the OVNM Host
Management Client.
After restarting OCC, the NonStop Node indicator should turn Green.
OCC: Errors and Warnings