OVNM 5.3 - Operations Agent for NonStop Troubleshooting Guide

OCC: Errors and Warnings 75
4-2-4 Configuring OCC Options
You can configure authentication and Startup options using the General tab page in the Options dialog box. To
access this, click on the Options command in the Tools menu.
Figure 4-11 OCC Options Dialog Box
The different error messages and warnings displayed when configuring options, their causes and the action to be
taken are described in the following table.
Table 4-3 Configuring OCC Options
Sr.No. Error Message and Warning
1.
Possible Causes: This message box is displayed when you enter a negative or alphanumeric value in the Session
Timeout box in the Log on to dialog box.
Action to be taken: Enter a positive integer in the Session Timeout box in the Log on to dialog box. Click on the OK
button to configuring the required options.
2.
Possible Causes: The valid value in the Session Timeout box is in the range of 1-59. This message box is displayed
when you enter a value greater than 59 in the Session Timeout box in the Log on to dialog box.
Action to be taken: Enter a positive integer between 1- 59 in the Session Timeout box. Click on the OK button to
configuring the required options.
OCC: Errors and Warnings