OVNM 5.3 - Operations Agent for NonStop Troubleshooting Guide

OCC: Errors and Warnings 76
4-2-5 Enabling or Disabling Recovery
The Recovery features in OCC triggers automated actions in case of a violation. You can define the recovery
actions to be taken for different violation conditions. This feature is disabled by default and has to be enabled
manually. Recovery can be activated or inactivated at the configuration and the object level using OCC.
Recovery can be enabled manually using the Action tab page in the Actions dialog box.
Figure 4-12 OCC Actions Dialog Box Action Tab Page
The error message displayed when enabling recovery feature, its cause and the action to be taken is described
below.
Table 4-4 Enabling Recovery Feature
Sr.No. Error Message and Warning
1.
Possible Causes: Selecting the User defined command option in the first Command box enables a second Command
box, where you can enter the command to be executed. This message box is displayed when the second
Command box is left blank.
Action to be taken: Enter the command to be executed in the second Command box. Make the required selections
in the Log, Schedule and Options sections and click on the OK button to save the required settings.