OVNM 5.3 - Operations Agent for NonStop Troubleshooting Guide

OCC: Errors and Warnings 77
4-2-6 Configuring E-Mail Alerts
You can also configure to send e-mail alerts when the object returns to its normal state. The e-mail alerts can be
configured using the Mail tab page in the Actions dialog box. This dialog box can be accessed using the Actions
button in the Threshold dialog box.
Figure 4-13 OCC Actions Dialog box with Mail Tab Page
The different error messages and warnings displayed when configuring E-Mail alerts, their causes and the actions
to be taken are described in the following table.
Table 4-5 Configuring E-mail Alerts
Sr.No. Error Message and Warning
1.
Possible Causes: The Mail on Violation check box is used to enable e-mail escalations in case of a violation
whereas the Mail on Normal check box is used to enable e-mail alerts when the object in violation returns to its
normal state. This message box is displayed when the To box is left blank in the Mail tab page in the Actions
dialog box.
Action to be taken: Specify the e-mail addresses, profile names or the distribution list to whom the alerts should be
sent in the To box. Enter the information in the remaining fields in the Mail tab page in the Actions dialog box and
click on the OK button to save the required settings.
OCC: Errors and Warnings