OVNM 5.3 - Operations Agent for NonStop Troubleshooting Guide
OCC: Errors and Warnings 88
4-2-10 Using OCC Features
OCC allows you to create, modify, or delete configurations and objects. You can also copy a configured
threshold to other nodes. OCC displays the One or more operations failed message box in case of errors while
using these features.
Figure 4-17 One or More Operations Failed Message Box
The different error messages displayed in the One or more operations failed message box, their causes and the
actions to be taken are described in the following table.
Table 4-15 Using OCC Features
Error Possible causes Action to be taken
Invalid Manager Name
Configuration
Invalid entry in the Manager Name field in the Threshold
dialog box. This field is not available for all the
subsystems. For example, Manager name for BASE24
objects has to be the NCP process that owns the
resource node and must have been defined during the
installation or using ALTROVNM before starting OCC.
Invalid Object Name
Configuration
Invalid entry in the Objects field in the Threshold dialog
box. This should contain the object name for the selected
subsystem. Wildcard characters are allowed for most of
the subsystems.
Invalid EMS Owner.Subsys
Configuration
Invalid entry in the Owner.Subsystem field in the
Threshold dialog box. This field is available for the EMS
subsystem.
Specify the owner and the
subsystem of the event in the
owner.subsystem format in the
Owner.Subsystem field.
Examples of valid Owner.Subsystem
are:
TANDEM.EMS,
TANDEM.PATHWAY, MYORG.1
For HP NonStop subsystems, the
subsystem owner is “TANDEM”.
Command Failed. Error = -
9999
Please List Again On working with thresholds or objects without updating
the displayed information with current data in the
Threshold and Objects pane.
Update the displayed thresholds
and objects with the current data in
the Threshold and Objects pane,
respectively, by listing them again.
Multi-Node Key in use. Try
again!
On trying to create a copy of a multi-node configuration. Check whether the configuration is
multi-node in the Multi-node column
of the Threshold pane.