OVNM 5.3 - Operations Agent for NonStop Troubleshooting Guide

OCC: Errors and Warnings 89
Table 4-15 Using OCC Features
Error Possible causes Action to be taken
Lost connection with node The connection with the NonStop node is lost. Refer to the Connectivity Problems
section to find the possible causes
and actions to be taken when the
connection with the NonStop node
is lost.
Host version mismatch There is a version mismatch between the OCC and the
NonStop Server OVNM component.
Insufficient Write privileges The user trying to perform a particular task does not
have the required Write privilege.
Login and authenticate with the user
name and password having the
required privileges to perform the
particular action.
<value1> and <value2>
should be >=0
The user trying to enter negative values in the Value1
and Value2 boxes.
Enter positive values in the Value1
and Value2 boxes and create the
threshold configuration again.
Threshold obsolete, use
PROCESS/LOOPING
Too many wildcards used,
review config
Too many objects found for use. The system attempted to
transfer too much data.
Use wildcard characters with care
as this increases the search for
objects to use for the threshold
configuration.
UPDATE OBJECTS/CONFIG
FAILED(201)
The current path to the device is down, an attempt was
made to write to a non-existent process, the message-
system request was incorrectly formatted, or an error
was found in the message system interface.
Invalid Threshold in current
OS Version
Support for the DIAGNOSING and SUSPENDED
thresholds is not available on Dxx machines. Selecting
these thresholds will cause this error message to be
displayed and no configuration or object will be added
to the database.
For example, Creating a threshold configuration of
ATP6100 subsystem on Dxx machines will give this error
message as these machines do not support
DIAGNOSING and SUSPENDED thresholds.
Please List Objects before
Add Object
When multiple users are working with thresholds or
objects without updating the displayed information with
current data in the Threshold and Objects pane.
For example, if one user has deleted a particular
threshold, then the other user on a separate workstation
trying to Add object to the threshold will encounter this
error.
Update the displayed thresholds
and objects with the current data in
the Threshold and Objects pane,
respectively, by listing them again.
OCC: Errors and Warnings