OVNM 5.3 - Operations Agent for NonStop User Guide

Appendix B: Sample InstInfo File 78
• MainPriority
The priority of the main OVNM process. The default value is 160.
• PrimaryCpu
Primary CPU of the main OVNM process. The default is 0.
• BackupCpu
CPU of the main OVNM process. The default is 1.
• LogToCollector
The collector where all the application events will be logged. Default is $0.
• NSDB_Location
Location of the NSDB subvolume. (For the Telco interface only)
• STAT_Subvolume
Location of the STAT subvolume.(For the Telco interface only)
• MQMACHINIFILE
Location of the MQ Series Mach Ini file. Use OSS name for MQ 5.3. Use Guardian file name for versions
of MQ prior to 5.3.
• Event_msg_format
The language to be used for NonStop message. The options available are English (default) and Japanese
(SJIS).
• Fault_tolerant_elink
To enable or disable the fault tolerant feature for guaranteed delivery of NonStop events for both single
and dual Operations Manager Management Server configurations. Can have a value of Yes or No.
• EMON_DIST01_Collector
The first default event source (collector) for OVNM filter. The default is $0.
• EMON_DIST01_Filter
The name of the OVNM filter file being used for filter - <volume>.<subvolume>.<filter file>. You can define
maximum three filters. The default is PASSALL filter.
• EMON_DIST01_CPU
The CPU on which the distributor process will run. The default value is same as specified in PrimaryCpu.
• EMON_DIST01_Priority
The priority of the distributor process. By default the value is 10 less than the priority specified in
MainPtiority.
• EMON_DIST01_Name
Name of the distributor.
• EMON_DIST01_ProcessName
Name of the distributor process.
NOTE: OVNM supports up to 20 Distributors for the EMON portion of OVNM. These distributors are
used to determine which events are sent to Console and/or any Enterprise Management System (like
HPOM). There are 6 parameters per distributor numbered from 01 to 20 (must be a 2-digit number.