OVNPM 1.5.2 - Performance Agent for NonStop Display Agent Guide

Using SystemAlert 113
9-3 Thresholds and Threshold Groups
You set threshold conditions for a SystemInsight metric. When these conditions are met, SystemAlert issues an
alarm.
1. Any number of thresholds can be combined into a threshold group with a special alert behavior for the
entire group.
2. The triggering condition of a threshold group is based on the alert status of its individual members. A group
can be triggered into alert status when any threshold in the group reaches alert status or when all
thresholds in the group reach alert status.
3. Before you can create or modify threshold and group alarms and define alarm behavior, you must be in the
Expert Mode.
9-3-1 Accessing the Expert Mode
Steps for accessing the expert mode:
1. Select the Expert Mode Option from the Options menu. The Expert Mode dialog box appears on the screen.
Figure 9-2 Expert Mode Dialog Box
2. Type the password in the Enter the password box and click on the OK button.
3. The default password is password. To change the password, use the Password option from the Options
menu.
Using SystemAlert