OVNPM 1.5.2 - Performance Agent for NonStop Display Agent Guide

Using SystemAlert 114
9-3-2 Configuring Thresholds and Threshold Groups
Steps for Configuring Thresholds and Threshold groups:
1. You can configure thresholds and threshold groups, click on the Configuration button in the Alert tab page.
The Groups and Thresholds Configuration dialog box is displayed.
Figure 9-3 Groups and Threshold Configuration Dialog Box
2. To create or modify a threshold, click on the Thresholds tab. To create or modify a threshold group, use the
Groups tab. Threshold configuration is available to only one user at a time.
3. To save all thresholds, or threshold group modifications, and close the Groups and Thresholds
Configuration dialog box, click on the OK button.
4. To save threshold or threshold group modifications, and remain in threshold configuration, click on the
Apply button.
5. To print, export, or import threshold configuration, click on the Action button. The available commands
allow you to print a configuration, export or import the configuration.
6. To cancel threshold or threshold group modifications, click on the Cancel button. A confirmation message
asks you to confirm your choice. Click on the Yes button to continue.