OVNPM 1.5.2 - Performance Agent for NonStop Display Agent Guide

Using SystemAlert 127
9-9 Alarm Status
The Alarm Status tab page is displayed by default when you access the Alert tab page.
Figure 9-16 Alert Alarm Status Tab Page
From the Alarm Status page, SystemAlert displays the status of all active thresholds in one of the following boxes:
• The Activated Groups box displays group thresholds that are in alert status, or group thresholds that
were in alert status, but are currently in normal status.
• The Activated Thresholds box displays simple thresholds that are in alert status, or simple thresholds that
were in alert status, but are currently in normal status.
Thresholds in alert status display an alarm indicator.
9-9-1 Displaying Individual and Group Alarms
When you receive numerous alarms, you can organize them to easily target the source of a problem. From the
Alarm Status tab page, you can display the following type of alarms:
• All threshold alarms at the same time.
• Threshold alarms associated with a specific group.
• Threshold alarms that do not belong to any groups.
To display all threshold alarms, click on the
icon in the Activated Groups box.
To display all threshold alarms that do not belong to a group alarm, click on the
icon in the
Activated Groups box.
The threshold alarms that are not in a group alarm appear in the Activated Thresholds box.
Using SystemAlert