OVNPM 1.5.2 - Performance Agent for NonStop Navigation Guide

Working with Navigator 11
2 Working with Navigator
2-1 Prerequisites
Before running OVNPM Navigator, ensure that the following tasks have been accomplished:
1. Any Web browser that is compliant with HTTP 1.0, HTML 3.2, JavaScript 1.2, Netscape 4.7 and Microsoft
IE 4.0 and higher versions are available.
2. OVNPM Server environment is installed and running on the HP Nonstop Server.
For details, refer to the OVNPM Server Guide.
3. The Navigator port should be available outside the firewall on the HP NonStop Managed Host.
2-2 Getting Started
Follow the steps below to start the Navigator application.
Step A: Opening the Navigator Window
Navigator can be started using the following methods.
Using Display Agent: A Navigator window can be started from the Display Agent Navigator tab. For details,
refer to the OVNPM Display Agent Guide.
Opening Directly in a Web Browser: Open a Web browser and enter the Navigator home page address in the
following format.
http://<Host>:<Navigator Port>
Where,
<Host> is the IP address or host name of the HP NonStop Server.
<Navigator Port> is the Navigator Port, as specified while installing the OVNPM components on the HP
NonStop Server.
For example, to connect to the HP NonStop server with IP Address as 111.111.111.111 and the Navigator port
as 5001, enter http://111.111.111.111:5001 in the address bar of the web-browser. If the HP NonStop
Server is registered in a DNS, using host name is recommended.
For example http://NONSTOP:5001/.
NOTE: In this guide, we would be using http://NONSTOP:5031/ for connecting to a Nonstop node.
Working with Navigator