OVNPM 1.5.2 - Performance Agent for NonStop Server Management Guide

1-2 System Requirements

1-2-1 Windows Workstation

Table 1-1 System Requirements on Windows

Component Description

Operating System Microsoft Windows 95,98,NT,2000,XP, Windows Server 2003 or Vista

Hardware 2.5 GHz Windows-based PC

Disk Space Approximately 100 MB of disk space to install and run the product.

Memory (RAM) 256 MB

1-2-2 HP NonStop Node

Table 1-2 System Requirements on HP NonStop Server

Component Description

Operating System

Any HP NonStop Server running D-Series, G-Series, H-Series (Itanium) or J-Series

(Blade) operating system.

For Itanium servers it is strongly recommend to use OS with version H06.10 and

above.

Operating System Release G06.xx and Higher Version for S-Series

HP Measure performance management software (T9086G12-AEH)

Hardware Any HP NonStop Server

Software TCP/IP

(The above protocol is required on each HP NonStop node to be managed by

OVNPM.)

At least one SPI channel must be free per PATHWAY in order to collect data on

the PATHWAY domain.

An active Measure subsystem Software Supported by HP NonStop System

Release D40 or Higher.

Disk Space Disk space for the OVNPM collection database can range from 200 MB for a

smaller system, such as an HP NonStop S7600 and up to 2GB for a larger

system.

Memory (RAM) 32 MB per CPU

NOTE: On Windows Server 2003, Data Protection must be deactivated to execute the display agent.