OVNPM 1.5.2 - Performance Data Analyzer User and Installation Guide

Working with Dashboards 45
5. Select the Filter type using the corresponding box. The options available in the Filter Type drop-down list
are:
• Select Top Entities: This option will allow you to select and display the statistics of N number of entities
from the top.
• Select Bottom Entities: This option will allow you to select and display the statistics of N number of
entities from the bottom.
• Select Filter: This option will allow you to select the filter to be applied. Enter the filter specifications
using the Select If field. In case you want to add more conditions, click on the
button.
• Sum of Entities: This option will allow you to display the sum of all the entities. Specify the display
name using Display As field. Enter the value of scale breaks using Scale By field. Select Avg. Result
check box to show the average result of the filtered data.
• Count of Entities: This option will allow you to display the count of all the entities. Specify the display
name using Display As field.
You can also edit or delete a filter using the corresponding right-click menu option.
6. Specify the maximum number of entities using the Max # of Entities field.
7. Select the entities using the Select drop-down field. The options available are as follows:
• All entities: This will select all the entities.
• Using conditions: Use this option to select entities based on criteria specified. An example has been
provided below for your reference.
Figure 5-7 Filter Display Option Dialog box
• Using Boolean Expressions: This option enables you to specify the Boolean expression as a filter
condition. Select the Expression using the corresponding drop-down
8. Specify the match criteria of the conditions using Match drop-down box. The options available are All
specified conditions and Any specified condition.
9. Click on the OK button to continue.
10. In order to meet the filter criteria, you need to apply the threshold conditions on the selected filter. Select
Display Options from the right-click menu of the filter. It will display the corresponding dialog box.
Working with Dashboards