PAM Configuration and Management Manual

SCF Error Messages
PAM Configuration and Management Manual—523349-003
C-3
00010
00010
Cause. An unsupported trace select function was specified in the TRACE command.
Recovery. Specify only supported trace select options.
00011
Cause. An incorrect LSAP PORT address was specified.
Recovery. Specify another LSAP address.
00012
Cause. An operator or management application program tried to modify the LSAP or
group MAC address while the LINE or PORT object was in a summary state other than
STOPPED.
Recovery. Before attempting to modify fields, use the STATUS command to verify that
the object is in the STOPPED summary state.
00013
Cause. An incorrect LSAP PORT address was specified.
Recovery. Specify another LSAP address.
00014
Cause. An attempt was made to add an LLC PORT with an incorrect address or to
add an address (odd or greater than %HFF).
Recovery. Reissue the command with a PORT address that has at most two
hexadecimal digits.
PAM 00010 Trace function invalid for object.
PAM 00011 Port LSAP address has already been defined by
another port.
PAM 00012 MSAP attribute cannot be modified in current
summary state.
PAM 00013 Reply was too large and has been truncated.
PAM 00014 Invalid PORT address for this type of port.