PAM Configuration and Management Manual

SCF Error Messages

PAM Configuration and Management Manual—523349-003

C-4

00015

Cause. An SCF command that is not applicable to LLC2 type ports was issued.

Recovery. Use the applicable SCF command.

00016

Cause. An SCF STOP MSAP #SNATR command was issued when SAPs were open.

Recovery. Use the SCF ABORT MSAP command to abort the SAPs and stop the

MSAP.

00017

Cause. An SCF command was issued to add a port type that is incompatible with the

type of LIF.

Recovery. Correct the command.

00018

Cause. There are incompatible PAM software versions.

Recovery. Ensure that all software is the correct version.

00019

Cause. An attempt was made to add or alter a PORT object, but the command had

invalid attributes.

Recovery. Reissue the command with valid attributes.

PAM 00015 Object: Command not supported for LLC2 ports

PAM 00016 MSAP #SNATR not stopped. Line has subordinate LLC2

PORT objects.

PAM 00017 Attribute not valid for this controller type.

PAM 00018 Internal data length invalid. Check versions of PAM

and PAMMAN.

PAM 00019 Attribute not valid for this port type.