PAM Configuration and Management Manual

SCF Error Messages
PAM Configuration and Management Manual—523349-003
C-5
00020
00020
Cause. An internal error occurred in PAM while performing an SCF command.
Recovery. Contact your service provider with the EMS log.
09990
Cause. The operator or management application specified a time interval that has
more than two digits to the right of the decimal point.
Recovery. Reissue the command, specifying a time interval with a precision that does
not exceed two digits to the right of the decimal point. For example, you can specify .14
as a time interval, but you cannot specify .141.
09991
Cause. The operator or management application specified a time interval that is not in
the range .1 through 60 seconds.
Recovery. Reissue the command, specifying a time interval in the range .1 through 60
seconds.
09992
Cause. The specified request size is larger than the maximum request size of the
LINE.
Recovery. Reissue the command with a request size less than or equal to the
maximum request size of the LINE.
09993
Cause. The command issued is supported for the named object, but not with the
specified subtype.
PAM 00020 PAM Internal Error: Unable to perform PORT command.
PAM 09990 The specified time interval exceeds two digits
right of the decimal point.
PAM 09991 The time specified is not in the legal range.
PAM 09992 Request Size is larger than maximum request size of
the line.
PAM 09993 Command not supported on specified subtype for
object-name.