PAM Configuration and Management Manual

PAM Configuration and Management Manual—523349-003
3-1
3 SCF for PAM
This section describes the SCF commands you can use to manage PAM. Table 3-1
lists the SCF commands and objects that are applicable to the PAM subsystem (with
page numbers indicating where the command is described). For a detailed description
of SCF, refer to the SCF Reference Manual for G-Series RVUs or the SCF Reference
Manual for H-Series RVUs.
User-written DSM application programs can perform the same management functions
using the DSM programmatic interface. DSM management application programming
for PAM is described in detail in the SPI Programming Manual and the PAM
Managment Programming Manual.
.
Table 3-1. SCF Commands and Objects (page 1 of 2)
Command Objects
LINE MSAP null PORT PROCESS SESSION
ABORT Command
on
page 3-6
XX X X X
ADD Command
on
page 3-11
X
ALTER Command
on
page 3-14
XX
DELETE Command
on page 3-17
X
INFO Command
on
page 3-18
XX X
LISTOPENS
Command on
page 3-25
X
NAMES Command
on page 3-26
XXXXX
PRIMARY Command
on page 3-31
X
START Command
on
page 3-32
XX X
STATISTICS (STATS)
Command on
page 3-34
XX X X
STATUS Command
on page 3-45
XX X X