PAM Configuration and Management Manual

SCF for PAM
PAM Configuration and Management Manual—523349-003
3-8
ABORT PORT Command
SUB [ ALL | NONE | ONLY ]
directs the command at a set of subordinate objects.
ONLY specifies that only the subordinate objects are affected.
ALL specifies that the named object and the subordinate objects are affected.
NONE specifies that none of the subordinate objects are affected.
SEL [NOT] state
directs the command only to objects in the specified state or only to those not in
the specified state. Valid states are STARTED, STARTING, STOPPED,
STOPPING, and SUSPENDED.
Consideration
All current sessions between the SNAX line handler and the parent PAM LINE object
are terminated. The SESSION objects and the LLC2 PORT objects are deleted.
Example
This example aborts an MSAP:
->ABORT MSAP $PAMA.#SNATR
ABORT PORT Command
The ABORT PORT command halts the operation of the specified PORT as quickly as
possible. Only enough processing is done to ensure that the PORT object can run
again when it is restarted. The object is left in the STOPPED state if the command is
successful.
Command Syntax
OUT file-spec
directs any SCF output generated for this command to the specified file.
PORT port-name
is the name of the port.
ABORT [ /OUT file-spec/ ] PORT port-name
[, SEL [NOT] state ]