PAM Configuration and Management Manual

SCF for PAM
PAM Configuration and Management Manual—523349-003
3-20
INFO PORT Command
Example
This example requests information about the MSAP object:
-> INFO MSAP $PAM5.#SNATR
INFO MSAP Display
The display for the INFO MSAP #SNATR command has this format:
Max Ports
is the maximum number of ports that can be opened through this MSAP.
INFO PORT Command
The INFO PORT command displays the information about the PORT object.
Command Syntax
OUT file-spec
directs any SCF output generated for this command to the specified file.
PORT port-name
is the name of the port.
Consideration
There are no considerations for this command.
Examples
These examples display information for LLC1, LLC2, and Ethernet ports:
-> INFO PORT $PAM1.#LLC1
-> INFO PORT $LAN24.#SAP004
-> INFO PORT $LAN54.#E1P2056
INFO MSAP $PAM5.#SNATR
Max Ports
63
INFO [ /OUT file-spec/ ] PORT port-name