PAM Configuration and Management Manual

SCF for PAM
PAM Configuration and Management Manual—523349-003
3-25
LISTOPENS Command
DATAFORWARDTIME
is the maximum amount of time an inbound message from the LAN should wait
before it is delivered to the application. The value must be specified in
HH:MM:SS.xxx format, where HH is hours, MM is minutes, SS is seconds, and xxx
is thousandths of a second (milliseconds). The valid range is 0.01 second (10
milliseconds) through 60 seconds. The decimal point is significant. Fractions of a
second must be entered with a zero preceding the decimal point (for example,
0.01). If the message should wait indefinitely, specify the keyword INFINITE.
The delivery of inbound messages is also triggered when the number of messages
present in the receive queue equals the DATAFORWARDCOUNT value described
here, regardless of the amount of time elapsed.
DATAFORWARDCOUNT
is the maximum number of inbound messages from the LAN that should be
queued before they are delivered to the application. The default is 1.
LISTOPENS Command
LISTOPENS is a nonsensitive command that displays information about the file-system
OPENs that apply to the specified object. The LISTOPENS command is not valid for
LLC2-type ports.
LISTOPENS PORT Command
The LISTOPENS PORT command displays information about the OPENs for the
PORT object.
Command Syntax
OUT file-spec
directs any SCF output generated for this command to the specified file.
PORT port-name
is the name of the port.
Consideration
There are no consideration for this command.
LISTOPENS [ /OUT file-spec/ ] PORT port-name