PAM Configuration and Management Manual

SCF for PAM
PAM Configuration and Management Manual—523349-003
3-26
NAMES Command
Example
This example requests a list of the open sessions for the specified port:
-> LISTOPENS PORT $PAM1.#LL4309
LISTOPENS PORT Display
The display for the LISTOPENS PORT command has this format:
Openers
is a list of the names of processes that have opened the PORT object.
PPID and BPID
are the primary-process and backup-process IDs associated with the openers of
the PORT object.
NAMES Command
NAMES is a nonsensitive command that displays all the fully qualified names specified
by the object name.
NAMES LINE Command
The NAMES LINE command displays all the fully qualified names specified by the
LINE name.
Command Syntax
OUT file-spec
directs any SCF output generated for this command to the specified file.
LINE line-name
is the name of the line.
SUB [ ALL | NONE | ONLY ]
directs the command at a set of subordinate objects.
PAM Listopens PORT $PAM1.#LL4309
Openers PPID BPID
$TRMP 2,107 5,097
NAMES [ /OUT file-spec/ ] LINE line-name
[SUB , [ ALL | NONE | ONLY ] ] [ , SEL [ NOT ] state ]