PAM Configuration and Management Manual

SCF for PAM
PAM Configuration and Management Manual—523349-003
3-31
PRIMARY Command
NAMES SESSION Display
The display for the NAMES SESSION command has this format:
PRIMARY Command
The primary command makes the backup processor the primary processor and the
primary processor the backup processor for the specified object. This is a sensitive
command.
PRIMARY LINE Command
The PRIMARY LINE command alternates the primary and backup processor for the
line.
Command Syntax
OUT file-spec
directs any SCF output generated for this command to the specified file. file-
spec must be a partially or fully qualified file name. If you do not specify this
option, the output goes to the home terminal.
CPU cpu-number
selects the new processor number.
Considerations
•
When you execute this command, the final summary state remains unchanged.
•
When you specify a processor in which the process is already running, the
command is rejected with a warning.
•
In a single command, you can specify only one of the attributes.
•
For cpu-number, use the backup processor number.
•
The PRIMARY command works even when the line state is STARTED. Issuing the
PRIMARY command when the line is in the STARTED state causes the line to
PAM Names SESSION \SYS08.$LINE01.*
SESSION
$LINEO1.#LLCT1 $LINE01.#LLCT2 $LINE01.#LLCT3
PRIMARY LINE [ /OUT file-spec/ ] line-name
[ , CPU cpu-number ]