PAM Configuration and Management Manual

SCF for PAM
PAM Configuration and Management Manual—523349-003
3-36
STATS LINE Command
STATS LINE Display
The display for the STATS LINE command has this format:
Sample Time
is the current date and time.
Reset Time
is the date and time the last reset operation was performed.
Messages In
Requests
is the number of message system requests received by PAM from other processes
such as SNAX and port interface applications.
PAM Stats LINE $PAM1
Sample Time..... 24 Nov 1997, 11:13:44.702
Reset Time...... 24 Nov 1997, 11:09:58.240
Messages IN Messages OUT
Requests............... 14D Requests............... 0D
Replies................ 13D Replies................ 0D
Cancels................ 0D Cancels................ 0D
Send errors............ 0D
Last Send Error........ 0
LIF OUT Stats LIF IN Stats
Register Requests...... 0 Deregister Requests.... 0
Register Fails......... 0 Deregister Fails....... 0
Reg Completion oks..... 0 Dereg Completion oks... 0
Reg Completion Fails... 0 Dereg Completion Fails. 0
Q PUTs................. 0D Q GETs................. 0D
Q PUT Fails............ 0D Q GET Fails............ 0D
Access Downs........... 0 Access Ups............. 0
Memory Stats
Current Allocations.... 15D
Maximum Allocations.... 16D
Total Allocations...... 49D
Total Deallocations.... 34D
Last Failure Size...... 0D
Failure Count.......... 0
QIO MD OUT Stats QIO MD IN Stats
Outbound MD Gets....... 1D Inbound MD Gets........ 0D
Outbound Dup MD Gets... 0D
Outbound MD Returns.... 0D Inbound MD Returns..... 0D
Outbound MD Highwater.. 1 Inbound MD Highwater... 0