PAM Configuration and Management Manual

SCF for PAM
PAM Configuration and Management Manual—523349-003
3-46
STATUS LINE Command
Examples
These examples return status information for the specified line with and without detail:
-> status line $lan24
-> status line $jcpm,detail
STATUS LINE Command Display
The display for the STATUS LINE command without the DETAIL option has this format:
Name
is the name of the line.
State
is the current summary state of the line.
Primary CPU, PIN
is the processor number and process ID number (PIN) for the primary process. A
value of -1 indicates that there is no backup process.
Backup CPU, PIN
is the processor number and PIN for the backup process.
Trace
indicates whether or not a trace of this line is active.
The display for the STATUS LINE command with the DETAIL option has this format:
State
is the current summary state of the line.
PAM Status LINE
Primary Backup
Name State CPU PIN CPU PIN Trace
$LAN24 STARTED 1 278 -1 -1 OFF
PAM Detailed Status LINE $LAN24
State................... STARTED
Trace................... OFF
Primary CPU............. 2 Backup CPU.............. 2
Primary Pin............. 269 Backup Pin............. 266
Logical Device.......... 0D Number of Ports......... 0D