PAM Configuration and Management Manual

SCF for PAM
PAM Configuration and Management Manual—523349-003
3-47
STATUS MSAP Command
Trace
indicates whether or not a trace of this line is active.
Primary CPU
is the primary processor number.
Backup CPU
is the backup processor number. A value of -1 in this field indicates that the line is
running without a backup process.
Primary Pin
is the PIN of the primary process.
Backup Pin
is the PIN of the backup process.
Logical Device
is the logical device (LDEV) number for this line.
Number of Ports
is the number of ports (PORT objects) configured on this line.
STATUS MSAP Command
The STATUS MSAP command displays information about the current status of the
specified MSAP object.
Command Syntax
OUT file-spec
directs any SCF output generated for this command to the specified file.
MSAP msap-name
is the name of the MSAP. The only valid MSAP name is #SNATR.
SEL [NOT] state
directs the command only to objects in the specified state or only to those not in
the specified state. Valid states are STARTED, STARTING, STOPPED,
STOPPING, and SUSPENDED.
STATUS [ /OUT file-spec/ ] MSAP msap-name
[ , SUB [ ALL | NONE | ONLY ] ] [ , SEL [ NOT ] state ]
[ , DETAIL ]