PAM Configuration and Management Manual

SCF for PAM
PAM Configuration and Management Manual—523349-003
3-49
STATUS PORT Command
STATUS PORT Command
The STATUS PORT command displays the current status of the specified PORT
object.
Command Syntax
OUT file-spec
directs any SCF output generated for this command to the specified file.
PORT port-name
is the name of the port.
Consideration
There are no considerations for the STATUS PORT command.
Examples
These examples request status information on Ethernet LLC1 and LLC2 ports:
-> STATUS PORT $PAMA.#LLCT27
-> STATUS PORT $PAMA.#SAP004
-> ASSUME LINE $LAN24
-> STATUS PORT *
STATUS PORT Display for LLC1
The display for a STATUS PORT command for an LLC1 port has this format:
Name
is the name of the port.
State
is the current summary state of the PORT object.
STATUS [ /OUT file-spec/ ] PORT port-name
[ , SUB [ ALL | NONE | ONLY ] ] [ , SEL [ NOT ] state ]
[ , DETAIL ]
PAM STATUS PORT $PAMA.#LLCT27
Name State Openers SDU Data Size
$PAMA.#LLCT27 STARTED 3 512