PAM Configuration and Management Manual

SCF for PAM
PAM Configuration and Management Manual—523349-003
3-53
STATUS SESSION Command
STATUS SESSION Display With Detail
The display for STATUS SESSION with DETAIL is:
State
is the summary state of the station.
Remote MAC Address
is the MAC address of the remote station.
Remote SAP Address
is the SAP value of the remote station.
Session State
is the data transfer state of the session. Possible values are:
For definitions of these states, see the PAM Management Programming Manual.
Requester Session ID
is a unique ID created by the session’s requestor.
PAM Detailed Status SESSION $LAN24.#SAP004.LS004001
State....................DEFINED
Remote MAC Address...... 08 008E 00D18F H
Remote SAP Address...... 4 Session State........ ADM
Requester Session ID.... 1 PAM Session ID...... 1
I-Frame Xmit Window..... 7 I-Frame Recv Window.. 7
Max Info Field Length ...1024 Access Priority ..... 0
Max Retries .............5 Response Timer ....0:33:20.000
Ack Delay Timer......... 0:25:00.000 Inactive
Timer.0:23:30.065
Route Info.... 0000 0000 0000 0000 0000 0000 0000 0000 0000 H
REPORT STATUS CHANGE:
Lost Link No Ack........ YES Lost Link Remote Busy.YES
Lost Link Reject Failed. YES SABME Recvd.......... NO
DISC Recvd.............. YES DM Recvd............. YES
Frame Reject Recvd...... YES Frame Reject Sent.... YES
Reset Done.............. YES Reset Failure........ YES
ADM SETUP
NORMAL BUSY
REJ AWAIT
AWAIT-BUSY AWAIT-REJ
RESET DISC