PAM Configuration and Management Manual

SCF for PAM
PAM Configuration and Management Manual—523349-003
3-54
STATUS SESSION Command
PAM Session ID
is a unique ID used by PAM for this session.
I_Frame Xmit Window
specifies how many transmitted I frame acknowledgments can be outstanding at
any time.
I-Frame Recv Window
specifies how many I-frames can be received before an acknowledgment must be
sent.
Max Info Field Length
is the maximum information field-length that can be received by this session.
Access Priority
is the priority to place in the AC field of all frames sent from this session.
Max Retries
is the number of times an I frame or S frame is retransmitted if no acknowledgment
is received.
Response Timer
specifies how long the session waits in seconds for an acknowledge from the
remote session of an I-frame sent.
Ack Delay Timer
specifies how long the session waits before sending an acknowledgment to the
remote session of an I frame received.
Inactive Timer
specifies how long the session must be idle before this session contacts the
remote session to assure the link is still intact.
Route Info
is the routing information to be added to all frames sent from this session. Up to 36
hexadecimal digits might be displayed.
REPORT STATUS CHANGE
These fields reflect the events for which PAM can send a STATUS_CHANGE_NOTICE
to the client and indicate the settings for this session. This list shows the causes of the
notifications that are sent based on the settings for these fields: