PAM Management Programming Manual

Commands and Responses
PAM Management Programming Manual—142481
5-47
STATISTICS PORT Command
ZCONN-LS-NOTIF-REJD
is the count of connect LS notifications sent by the PAM subsystem to SNAX/XF or
SNAX/APN that were rejected by SNAX/XF or SNAX/APN. This field is valid
only for LLC2 ports.
ZSTATUS-CHG-NOTIF-SENT
is the count of status change notifications sent by the PAM subsystem to SNAX/XF
or SNAX/APN. This field is valid only for LLC2 ports.
ZSTATUS-CHG-NOTIF-REJD
is the count of status change notifications sent by the PAM subsystem to SNAX/XF
or SNAX/APN that were rejected by SNAX/XF or SNAX/APN. This field is valid
only for LLC2 ports.
ZSEND-BYTES
is the total bytes sent by the PAM subsystem to the token-ring LAN. This field is
valid only for LLC2 ports.
ZRECV-BYTES
is the total bytes received by the PAM subsystem from the token-ring LAN. This
field is valid only for LLC2 ports.
ZPAM-MAP-STATS-FILE-SYS is an extensible structured token that displays the
number of file-system requests processed, by request type, for the specified PORT.
This token has the token number ZPAM-TNM-STATS-FILE-SYS and the DDL
definition ZPAM-DDL-STATS-FILE-SYS. It is present in the RESETSTATS PORT and
STATISTICS PORT response record. This token is not present for LLC2 ports. ZPAM-
MAP-STATS-FILE-SYS contains the following fields:
ZRESET-TIME
is the time when the file-system’s statistics counters were last reset to zero with a
RESETSTATS PORT command.
ZCURR-TIME
is the current time.
ZCTL-REQ
is the number of file-system CONTROL requests received by the port.
ZREAD-REQ
is the number of file-system READ requests received by the port.
ZWRITE-REQ
is the number of file-system WRITE requests received by the port.