PAM Management Programming Manual

Commands and Responses
PAM Management Programming Manual—142481
5-65
STATUS SESSION Command
ZACCESS-PRI
specifies which priority to place in the AC field of all frames sent from this session.
No default value is specified.
ZROUTE-INFO
specifies routing information to be added to all frames sent from this session. Up to
36 hexadecimal digits may be displayed.
Operational Notes
There are a number of things you should remember when using the STATUS command:
•
The PORT object returns a ZPAM-TKN-OBJ-SUBTYPE token in each response.
The object subtype values are
ZPAM-VAL-PORT-TYPE-ENET
ZPAM-VAL-PORT-TYPE-LLC1
ZPAM-VAL-PORT-TYPE-LLC2
•
You can use the ZCOM-TKN-SUB token to obtain status information for the
specified object and/or its subordinate objects, if any. The acceptable values for this
token are as follows:
ZCOM-VAL-SUB-ALL
returns status information for the specified object and its subordinate objects, if
any.
ZCOM-VAL-SUB-NONE
returns status information for the specified object, but not for subordinate
objects.
ZCOM-VAL-SUB-ONLY
returns status information for the subordinate objects, but not the specified
object.
•
You can use the ZCOM-TKN-SEL-SUMSTATE token to obtain status information
for only those objects that are currently in a specified summary state.
•
You can use both the ZCOM-TKN-SUB and the ZCOM-TKN-SEL-SUMSTATE
tokens, in combination, to obtain status information for only those objects and/or
subordinate objects that are currently in a specified summary state.
•
There is no summary state transition associated with the STATUS command.
•
The ZPAM-VAL-PORT-TYPE-ENET subtype is invalid for the Token-Ring
ServerNet adapter (TRSA).
•
The ZPAM-VAL-PORT-TYPE-LLC2 subtype is invalid for the Ethernet 4
ServerNet adapter (E4SA).