PAM Management Programming Manual

Event Messages
PAM Management Programming Manual—142481
6-8
201: ZPAM-EVT-AGGR-SDU-NOT-DELIV
ZEMS-TKN-CONSOLE-PRINT
directs the compatibility distributor to process the event message (ZSPI-VAL-
TRUE).
ZEMS-TKN-CPU
is the processor number of the reporting subsystem process.
ZEMS-TKN-CRTPID
is the CRTPID of the reporting subsystem process.
ZEMS-TKN-GENTIME
is the time (GMT) that the reporting subsystem created the event message.
ZEMS-TKN-LOGTIME
is the time (GMT) that the collector wrote the event message to its log files.
ZEMS-TKN-PIN
is the process ID number (PIN) of the reporting subsystem process.
ZEMS-TKN-SYSTEM
is the Expand system number of the system (node) on which the event was reported.
ZEMS-TKN-USERID
is the user ID of the reporting subsystem process.
ZEMS-TKN-LDEV
is the logical device number of the process reporting the event.
ZPAM-TKN-CNT
is the number of aggregate SDUs that have not been delivered over the last three
minutes.
ZPAM-TKN-SDN
is the subdevice number of the port.
ZPAM-TKN-CAUSE
is used to report values that indicate the reason for a problem. The possible values of
ZPAM-TKN-CAUSE for this event are as follows:
ZPAM-VAL-CAUSE-NO-READ
The aggregate SDU could not be read.