PAM Management Programming Manual

Event Messages
PAM Management Programming Manual—142481
6-44
213: ZPAM-EVT-TR-NOTIF-NOT-DELIV
Window_Exceeded
indicates that the Transmit Window to SNAX is full.
SAP_Closed
indicates that the SAP (identified by the port name) has already been closed by
SNAX.
Out_of_Memory
indicates that the PAM process ran out of memory, possibly because of heavy
traffic.
ZPAM-TKN-SEND-COMPL-ERR
is the send completion error received by the PAM process when it attempted to send
this notification.
ZPAM-TKN-MSG-SYS-ERR
is the message system error received by the PAM process when it attempted to send
this notification.
Probable Cause
The cause of this error is described in ZPAM-TKN-NOT-NOTIF-CAUSE.
Recommended Action
Loss of notifications to the SNAX line-handler process will generally result in SNAX
timing out and reestablishing the session. When a Link_Failed or a
Window_Exceeded error is received, SNAX should reopen the SAP and reestablish the
session.
If the
Out_of_Memory or Window_Exceeded error is temporary, subsequent
notifications will be delivered and no action is necessary. However, if these errors are
not temporary, you should contact your service provider and provide all relevant
information as follows:
•
Descriptions of the problem and accompanying symptoms
•
Details from the message or messages generated
•
Supporting documentation such as Event Management Service (EMS) logs, trace
files, and a processor dump, if applicable
If your local operating procedures require contacting the Global Customer Support
Center, supply your system number and the numbers and versions of all related products
as well.