PAM Management Programming Manual

Common Definitions
PAM Management Programming Manual—142481
4-15
Tokens in Event Messages
ZPAM-VAL-NOT-NOTIF-WIN-OVRFLOW
The number of outstanding requests from PAM process to SNAX exceeds
SNAX_RX_WINDOW.
ZPAM-VAL-NOT-NOTIF-SAP-CLOSED
The PAM process received a fatal error when delivering the notification to
SNAX. The PAM process aborts and deletes the port encountering the error.
ZPAM-VAL-NOT-NOTIF-NO-BUFFER
The PAM process has run out of extended memory pool.
ZPAM-TKN-NOT-SENT-CAUSE
indicates the reason for not sending the request. The possible values are
ZPAM-VAL-NOT-SENT-LIF-FAILED
indicates that PAM could not send the message to the logical interface (LIF).
ZPAM-VAL-NOT-SENT-LINK-FAILED
the PAM process detected a failure in the link. Error handling and recovery is
the responsibility of the SNAX line-handler process.
ZPAM-TKN-NOTIF-TYPE
indicates the type of notification that was not delivered to the SNAX line-handler
process. The possible values of the token for this event are as follows:
ZPAM-VAL-NOTIF-INBOUND-SDU
event pertains to Received_AggSDU notification.
ZPAM-VAL-NOTIF-LS-CONNECTED
event pertains to LS_Connected notification.
ZPAM-VAL-NOTIF-FLOW-CONTROL
event relates to Flow_Control notification.
ZPAM-VAL-NOTIF-STATUS-CHANGE
event relates to Status_Change_Notice notification.
ZPAM-TKN-PARAM
contains the parameter in the SDU message header that is invalid.
ZPAM-TKN-PORT-ADDR
is the port address.