Pathmaker Messages Manual

Pathmaker Messages
2–150 067870 Tandem Computers Incorporated
No PMCB available; Send to server-class
Cause. The request requires the TCP to communicate with an external PATHMON,
but the maximum number of PATHMON processes the TCP can communicate with
has been reached.
Send error issued by the generated application.
Effect. SEND fails.
Recovery. The value specified in the SET TCP MAXPATHWAYS parameter sets the
maximum number of PATHMON processes the TCP can communicate.
If this parameter is less than the maximum value of 4095, then increase it.
No parameters found for called requester
Cause. You have not defined formal parameters for the called requester.
Issued by the Pathmaker product.
Effect. Pathmaker displayed the CALL Parameter Definition screen of the calling
requester but did not create the CALL parameter list.
Recovery. This is an advisory message. No recovery is needed immediately, but you
must define the formal parameters on the called requester's Requester Parameters
screen before you can complete the CALL Parameter Definition screen.
No parameters found for this service
Cause. You did not define the IPCs for this service.
Issued by the Pathmaker product.
Effect. Pathmaker displayed the SEND Parameter Definition screen but did not create
the SEND parameter list.
Recovery. You must define the IPC request and reply messages for the service before
you can complete the SEND Parameter Definition screen.