Pathmaker Programming Guide

Creating a Custom Application
Sample Pathmaker Sessions
10–26 067868 Tandem Computers Incorporated
Figure 10-11. SEND Parameter Definition Screen
S E N D P A R A M E T E R D E F I N I T I O N
==============================================================================
Requester: ORDER-TAKER Function Key: F2
To Service: CHECK-ORDER
Requester Reference Field B/A
SEND: MODEL-NUMBER_________________________________________________ A
TO: MODEL-NUMBER
SEND: QTY-ORDERED__________________________________________________ A
TO: QTY-ORDERED
RECV: UNIT-PRICE___________________________________________________ A
FROM: UNIT-PRICE
RECV: TOTAL-PRICE__________________________________________________ A
FROM: TOTAL-PRICE
RECV: PART-TIMESTAMP_______________________________________________ A
FROM: PART-TIMESTAMP
_____________________________________________________________ _
_____________________________________________________________ _
_____________________________________________________________ _
==============================================================================
F2-Update F4-List F5-Next F9-Value List F16-Return
SEND parameters listed--parameters have been created
BLOCK
Check your screen to determine if it matches the one shown in Figure 10-11.
You should not have to change any of the entries on this screen. Press F16 to
return to the Function Key Assignments screen.
Position the cursor on SEND PLACE-ORDER and press F10 to reach the SEND
Parameter Definition screen.