Pathmaker Programming Guide

Creating a Custom Application
Sample Pathmaker Sessions
067868 Tandem Computers Incorporated 10–27
Figure 10-12. SEND Parameter Definition Screen Page 1
S E N D P A R A M E T E R D E F I N I T I O N
==============================================================================
Requester: ORDER-TAKER Function Key: F4
To Service: PLACE-ORDER
Requester Reference Field B/A
SEND: CUSTOMER-NAME________________________________________________ A
TO: CUSTOMER-NAME
SEND: CUSTOMER-ADDRESS_____________________________________________ A
TO: CUSTOMER-ADDRESS
SEND: CUSTOMER-PHONE_______________________________________________ A
TO: CUSTOMER-PHONE
SEND: MODEL-NUMBER_________________________________________________ A
TO: MODEL-NUMBER
SEND: QTY-ORDERED__________________________________________________ A
TO: QTY-ORDERED
SEND: PART-TIMESTAMP_______________________________________________ A
TO: PART-TIMESTAMP
RECV: UNIT-PRICE___________________________________________________ A
FROM: UNIT-PRICE
RECV: TOTAL-PRICE__________________________________________________ A
FROM: TOTAL-PRICE
==============================================================================
F2-Update F4-List F5-Next F9-Value List F16-Return
SEND parameters listed--parameters have been created
BLOCK
Check your screen to determine if it matches the one shown in Figure 10-12.
You should not have to change any of the entries on this screen.
Press F5 to see the remaining SEND parameter as shown in Figure 10-13.