Pathmaker Programming Guide

Creating a Custom Application
Sample Pathmaker Sessions
10–28 067868 Tandem Computers Incorporated
Figure 10-13. SEND Parameter Definition Screen Page 2
S E N D P A R A M E T E R D E F I N I T I O N
==============================================================================
Requester: ORDER-TAKER Function Key: F4
To Service: PLACE-ORDER
Requester Reference Field B/A
RECV: PART-TIMESTAMP_______________________________________________ A
FROM: PART-TIMESTAMP
_____________________________________________________________ _
_____________________________________________________________ _
_____________________________________________________________ _
_____________________________________________________________ _
_____________________________________________________________ _
_____________________________________________________________ _
_____________________________________________________________ _
==============================================================================
F2-Update F4-List F5-Next F9-Value List F16-Return
SEND parameters listed
BLOCK
Press F16 to return to the Function Key Assignments screen. Press F16 from
the Function Key Assignments screen to return to the Requester Definition
screen. Press F7 from the Requester Definition screen to reach the Requester
Generation Data screen.
i. Generate the requester.
You can enter a valid source file name and a listing device for your system, if
you want. (You do not need to specify a source file or a listing device to
generate a requester.)
Press F2 to update this screen. Press F16 to return to the Requester Definition
screen. From the Requester Definition screen, press shifted F6 to begin
generating this requester. You can check on the status of the generation later
by returning to the Requester Generation Data screen for this requester.